What is SWG and AWG, what’s their difference? and which should I choose?

SWG and AWG are two different wire gauge standards used to specify the size of electrical wires. Here’s a breakdown of each:

1. SWG (Standard Wire Gauge): SWG is a British wire gauge standard that was widely used in the United Kingdom and other British colonies. It is based on a series of specific wire diameters, with increasing gauge numbers indicating smaller wire sizes. For SWG, the higher the gauge number, the thinner the wire. SWG is commonly used for measuring non-ferrous wires (e.g., copper and aluminum).
2. AWG (American Wire Gauge): AWG is an American wire gauge standard that is predominantly used in North America. Like SWG, it is based on a series of specific wire diameters. However, with AWG, the opposite is true: higher gauge numbers indicate larger wire sizes. AWG is commonly used for measuring both non-ferrous and ferrous wires.

The main difference between SWG and AWG lies in the gauge numbering system and the relationship between gauge number and wire size. If you are in the United Kingdom or a region that predominantly uses the British system, SWG may be the more appropriate choice. On the other hand, if you are in North America or an area where the American system is prevalent, AWG is generally the standard to follow.

It’s important to note that using the correct wire gauge for a specific application is crucial for electrical safety and proper functioning of electrical systems. If you’re uncertain about which gauge to choose or have specific requirements, it’s advisable to consult local electrical codes, standards, or a qualified electrician to ensure you select the appropriate wire gauge for your needs.

LP Industry can produce magnet wires according to your requirement with best prices, check our website to learn more: wiresbusiness.com